Junger-audio C8086+ - Level Magic II ™ processor Manual de usuario descargar pdf (Pagina 12)

Rev. 140416

digital audio

modular

processing system

C8000

Enhanced 8 channel Level MagicII™ processor

C8086+

12/16

Compressor [On / Off]

Reference Level (dBFS) [-40 … 0]

Range (dB) [0 … 20]

Ratio [1.1 / 1.2 / 1.3 / 1.5 / 1.8 / 2.0 / 2.5 / 3.0 / 4.0 ]

Processing [live / speech / pop / uni / classic]

Proc Status Enable [On / Off]

it is possible to monitor the gain change of the control process.

An error status will be provided if the average of the gain change

is equal to, or above, the Leveler Range setting for more than

10s. If this option is turned on, a soft LED of the GUI will turn

from red to green. This status information is combined for all

processed channels and is presented as a module status to an

external monitoring system by sending a SNMP trap and/or by

firing a GPO. The parameter itself is also available for polling.

Bit Transparent [off / on / auto]

for pairs of input signals it is possible to switch the signal path

into "bit transparent" mode. This allows to path non audio

signals (e.g. Dolby E) through the processor

without destroying it.

off – not transparent for Non Audio signals

on – transparent for Non Audio signals, no processing

auto – automatic switch over to transparent if a Non Audio

signal is detected at the input.

Expert [On / Off]

Clear Processing History [clear]

(Preset) hold down the <clear> soft button to clear the history. Tick the

checkbox if the preset must clear the processing history.

Initial Dynamic Gain (dB) [-40 … 40]

AGC Recovery [normal / fast]

Low Level Behavior

Processing Threshold (dBFS) [-80 … -20]

Below Threshold Mode [release / hold]

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Junger-audio C8086+ - Level Magic II ™ processor Manual de usuario Pagina 12